N,N-DIMETHYLCYCLOHEXYLAMINE

PRODUCT IDENTIFICATION

CAS NO. 98-94-2

N,N-DIMETHYLCYCLOHEXYLAMINE

EINECS NO. 202-715-5
FORMULA C6H11N(CH3)2
MOL WT. 127.23
H.S. CODE

TOXICITY

Oral rat LD50: 348 mg/kg
SYNONYMS N,N-Dimethylaminocyclohexane; Dimethylcyclohexylamine;
Ciclohexildimetilamina; (Dimethylamino)cyclohexane; N-Cyclohexyldimethylamine; N,N-Dimethylcyclohexanamine; N,N-Dimethyl-N-cyclohexylamine; Cyclohexyldimethylamine;

DERIVATION

 

CLASSIFICATION

 

PHYSICAL AND CHEMICAL PROPERTIES

PHYSICAL STATE clear liquid
MELTING POINT -60 C
BOILING POINT

160 C

SPECIFIC GRAVITY

0.851

SOLUBILITY IN WATER

slightly soluble (10 g/l)

pH  
VAPOR DENSITY 4.93
AUTOIGNITION

215 C

NFPA RATINGS

REFRACTIVE INDEX

FLASH POINT

40 C

STABILITY Stable under ordinary conditions.

GENERAL DESCRIPTION & APPLICATIONS

Cyclohexane is the six-membered alicyclic hydrocarbon consisting of six carbon atoms linked to each other to form a ring, with each carbon atom bearing two hydrogen atoms, C6H12. A cyclic compound is an organic compound that contains one or more closed rings of carbon atoms. The term alicyclic refers to cyclic compound that behaves chemically like aliphatic compounds (open-chain), which means the exclusion of carbocyclic compounds of aromatic rings with an array of ¥ð-electrons characteristic. Cyclohexane is a colorless, highly flammable, mobile liquid with a pungent odor. It is insoluble in water and soluble in alcohol, ether, and almost organic solvents. Cyclohexane is a non-corrosive and quick volatilize liquid and sublimes between -5 to 5 C. Cyclohexane can exist in a number of  interconvertible three-dimensional conformations, the two simplest being are the chair and boat conformation and others include the half-chair and twist-chair conformation. Cyclohexane can cause irritation to the eyes and mucous membranes in workers. Repeated and prolonged contact with skin may cause dermatitis. The substance has not been shown to cause the hematologic changes associated with exposure to benzene. Cyclohexane occurs naturally in crude oils. Some cyclohexane is recovered from petroleum streams by fractionation. The bulky commercial  production of cyclohexane is based on hydrogenation of benzene in closed system. Cyclohexane consumption is linked almost entirely to nylon production. Nylon is further processed into fibers for applications in carpeting, automobile tire cord, clothing, and other growing industrial fields. Cyclohexane is used as a solvent, oil extractant, paint and varnish remover, dry cleaning material, and in solid fuels. It has been used as a insecticide itself. Cyclohexane is used as a chemical intermediate to produce target molecules. Natural compounds of one to five alicyclic rings with great variety and complexity are found particularly in steroids and terpenes. Cyclohexane structure, six membered-ring, is one of the major skeleton in nature. Cyclohexane derivatives can be used for the synthesis of pharmaceuticals, dyes, herbicides, plant growth regulator, plasticizers, rubber chemicals, cycloamines and other organic compounds.

Cyclohexylamine is used as an intermediate for the synthesis of

  • Herbicides (e.g. S-ethyl N-ethyl cyclohexyl thiocarbamate)
  • Antioxidants & vulcanization accelerator (e.g. N-cyclohexyl 2-benzothiazole sulfenamide)
  • Mucolytics
  • Broncodialators (e.g. bromhexine HCl)
  • Analgesic agents
  • Additive for prevention of CO2
  • Corrosion inhibitor in steam pipelines and boilers
  • Urethane chain stopper
  • Artificial sweetener such as cyclamates.
SALES SPECIFICATION

APPEARANCE

clear liquid
PURITY (G.C)

98.5% min

MOISTURE

0.2% max

COLOR (AHHA)

20 max

TRANSPORTATION
PACKING 160kgs in drum
HAZARD CLASS 8 (Packing group; II)
UN NO. 2264
OTHER INFORMATION
Hazard Symbols: C N, Risk Phrases: 10-20/21/22-34-50/53, Safety Phrases: 26-28-36/37/39-45-61

GENERAL DESCRIPTION OF AMINE

Amine is a group of basic organic compounds derived from ammonia (NH3) by replacement of one (primary amines), two (secondary amines), or three (tertiary amines) hydrogen atoms by alkyl, aryl groups or organic radicals. Most low mole weight aliphatic amines are liquids with characteristic ammonia-like odor. But methylamines are gases and long chain alkylamines (from C12) or higher mole weight amines are solid. The water solubility is decreasing if molecular weight increase. They are freely soluble in common organic solvents such as methanol, acetone, toluene, and ether except aliphatic hydrocarbons. Amines, like ammonia, are weak bases because the unshared electron pair of the nitrogen atom can form a coordinate bond with a proton. Amines react with acids to give salts and with acid anhydrides (or ester ) to form amides. They react with halogenoalkanes to form longer chains.

Many amines are not only bases but also nucleophiles that form a variety of electrophile compounds. They are important intermediates for chemical syntheses due to the basic functionality of the nitrogen atom and electrophilic substitution at nitrogen. Some examples of compounds obtained by reaction of amines are:

  • Amides (by reaction with acyl halides or ammonium carboxylate salts)
  • N-Alkyl amines (by reaction with halogenoalkanes)
  • Isocyanates (by reaction with phosgene)
  • Carbamoyl chlorides or Urea derivatives (by reaction with phosgene)
  • Alkoxylated amines (by reaction alkylene oxide)
  • Quaternary ammonium compounds (by reaction with alkyl halides and dialkyl sulfates)
  • N-Alkylcarbamic acids or N,N'- Dialkyl ureas (by reaction  with carbon dioxide)
  • Urea derivatives (by reaction with isocyanates)
  • Schiff bases (by reaction with aldehydes or ketones)
  • Aminopropionitriles (by reaction of 1° and 2° amines with acrylonitrile)
  • N-Alkylamino acids (by reaction of 1° and 2° amines with monochloroacetic acid or with unsaturated acids)
  • Amine oxides (by reaction of 3° amines with hydrogen peroxide)
  • Sulfonamide derivatives (by reaction of 1° and 2° amines with benzenesulfonyl chloride)

Low molecular amine names are formed by adding '-amine' as a suffix to the name of the parent compound. In substitutive nomenclature, the prefix 'amino-' is placed before the name of the parent compound to denote the functional group in high molecular amines. Synthetic amines are made mostly by reaction of alcohols with ammonia, catalyzed by metals( nickel or copper) or metal oxide at high temperature. Many methods have been devised for the synthesis of the amines; reacting ammonia with an alkyl halide and neutralizing the resulting alkyl ammonium salt with an alkali, e.g., sodium hydroxide. This procedure yields a mixture of primary, secondary, and tertiary amines that is easily separated into its three components by fractional distillation; boiling methyl isocyanate with caustic potash, heating the alkyl iodides with ammonia; reduction of nitriles with alcohol and sodium; heating the esters of nitric acid with alcoholic ammonia; reducing on nitro-paraffms;  action of zinc and hydrochloric acid on aldehyde ammonias; reduction of the phenylhydrazones and oximes of aldehydes and ketones with sodium amalgam in the presence of alcohol and sodium acetate; action of dilute hydrochloric acid on the isonitriles; heating the mustard oils with a mineral acid, by the hydrolysis of the alkyl phthalimides.

Primary amines contain the functional group -NH2 (called amino group) and are converted into secondary and tertiary amines if heated with alkyl or aryl iodides. Primary amines form various oxidation products violently with concentrated nitric acid. If the amines are acetylated, they form nitro derivatives with concentrated nitric acid. Primary amines form diazonium salts with nitrous acid in cold solution in the presence of excess of mineral acid. Or a diazoamine is obtained in absence of excess of acid. Other reactions are condensation products with aldehydes; forming anilides; forming alkyl thioureas; yielding  isonitriles with alcoholic potash and chloroform. Tertiary amines combine with one molecular proportion of an alkyl iodide to form quaternary ammonium salts in which a central nitrogen atom is joined to four organic radicals and one acid radical. Quaternary ammonium salts are used as corrosion inhibitor, emulsifying and antiseptic agents. Aliphatic amines which have the lowest carbon content are water-soluble gases or liquids of low boiling point also readily soluble in water in case of the next low carbon content. But aliphatic amines which have the high carbon content are odourless solids of high boiling point and are insoluble in water. They are all bases and easily form salts with the mineral acids and double salts with the halogenoalkanes. Amine Salts are crystalline substances that are readily soluble in water. Many insoluble alkaloids (e.g. quinine and atropine) are used medicinally in the form of soluble salts. If alkali (sodium hydroxide) is added to solutions of such salts the free amine is liberated. Short chain alkyl amines are used as raw materials of solvent, alkyl alkanolamines, and ingredients of rocket fuels. They are used to make other organic chemicals including rubber vulacanization accelerators, pesticides, quaternary ammonium compounds, photographic chemicals,  corrosion inhibitors, explosives, dyes and pharmaceuticals. They are used in rayon and nylon industry to improve the tensile strength.

Allylamines are used as intermediates for ion exchange resins, pharmaceuticals, water soluble polymers, herbicide softeners, rubber chemicals, polymerization initiators and cross-linking agents. Amines are used as reducing agents for the recovery of precious metals. They are versatile intermediates. They have active applications in organic synthesis for polymerization catalyst, chain extender in urethane coatings, agrochemicals, pharmaceuticals, photographic, heat stabilizers, polymerization catalysts, flame-retardants, blowing agents for plastics, explosives, and colorants. Long chain alkyl amines are used for the synthesis of organic chemicals and surfactants used as a corrosion inhibitor, detergent, ore floating agent, fabric softener, anti-static agent, germicide, insecticide, emulsifier, dispersant, anti-caking agent, lubricant and water treatment agent. Alkyl tertiary Amines are used as fuel additives and preservatives. They have similar applications with long chain alkyl amines. Hexamethylenediamine used in the manufacture of nylon-6,6 is prepared by catalytic addition of hydrogen to nitriles.

Aromatic amines also exist, such as phenylamine, which are important for the production of diazonium salts. They dissociate in water (some very weakly). Aromatic amines are much weaker bases than the aliphatics. One of the most important aromatic amines is aniline, a primary aromatic amine replacing one hydrogen atom of a benzene molecule with an amino group. It is a pale brown liquid at room temperature; boiling at 184 C, melting at -6 C; slightly soluble in water and freely soluble in ether and alcohol. It causes serious industrial poisoning.  The substance may have effects on the blood, resulting in formation of methaemoglobin. Repeated or prolonged exposures may be carcinogenic. Commercial aniline is obtained from nitrobenzene which is prepared from benzene with nitric acid by electrophilic substitution reaction or from chlorobenzene by heating  with ammonia in the presence of copper catalyst. It is also obtained as a by-product of coal tar. In commerce the term of aniline oil blue refers to the pure one while aniline oil red indicates a mixture of aniline and toluidines with equimolecular weights.

Considerable quantity of aniline is converted into 4,4¡¯-methylenedianiline (MDA) by the condensation reaction of formaldehyde with aniline in the presence of hydrochloric acid. MDA is is used as an epoxy curing agent, a corrosion inhibitor and molded plastics, and as an intermediate to prepare organic compounds used for polyurethane, spandex fibers, azo dyes, isocyanates and poly(amide-imide) resins. Other important aromatic amine compound as the starting material to produce polyurethane foam production is toluenediamine (TDA). TDA is the mixture of 2,4-diaminotoluene and 2,6-diaminotoluene, usually in a ratio of 80:20. Most of TDA is used in the manufacture of toluene diisocyanate (TDI), which is the predominant diisocyanate in the flexible foams and elastomers industries. TDI reacts with an alcohol to form urethane linkages. Other applications of TDA include to produce dyes, polyamides, antioxidants, hydraulic fluids, and fungicide stabilizers. Aniline is a starting moiety to prepare plant protecting agents. Examples include fenuron (CAS RN: 101-42-8), propham (CAS RN: 122-42-9), Siduron (CAS RN: 1982-49-6), Carboxin (CAS RN: 5234-68-4), fenfuram (CAS RN: 24691-80-3) and propachlor (CAS RN: 1918-16-7). Aniline is processed to produce a series of compounds being used in the rubber industry, e.g. diphenylguanidines, phenylenediamines mercaptobenzothiazoles, aniline ketones and etc. There are three isomers of phenylenediamine: ortho-, meta-, and para-phenylenediamine. They are low toxic diamines used as components of plastic composites and engineering polymers. They are used to produce aramid fibers, dyes including hair dyes, rubber chemicals (vulcanization accelerators and antioxidants), and pigments.

Aniline is the starting material in the dye manufacturing industry. It forms aniline colors when combined with other substances, particularly chlorine or chlorates. Aromatic amines are weaker bases reacting with strong acids to form amides. Anilide is an amide derived from aniline by substitution of an acyl group for the hydrogen of NH2.  Acetanilide is from acetic acid and aniline. Acetanilide is an odourless, white flake solid or crystalline powder (pure form); soluble in hot water alcohol, ether, chloroform, acetone, glycerol, and benzene;; melting point 114 C and boiling point 304 C; can undergo self-ignite at 545 C, but is otherwise stable under most conditions. Acetanilide which can be obtained by acetylation of aniline undergoes nitration at low temperature and yields highly the para-nitro products. Acetyl group can then be removed by acid-catalyzed hydrolysis to yield para-nitroaniline. Although the activating affection of the amino group can be reduced, the acetyl derivative remains an ortho/para-orientation and activating substituent. Aniline is converted into sulfanilic acid which is the parent compound of the sulfa drugs. Aniline is also important in the manufacture of rubber-processing chemicals, explosives, plastics, antioxidants and varnishes. Amines take part in many kinds of chemical reactions and offer many industrial applications.