o-CRESOL SULFONIC ACID

PRODUCT IDENTIFICATION

CAS NO. 7134-04-5, 52277-26-6

o-CRESOL SULFONIC ACID

EINECS NO.  
FORMULA C7H8O4S
MOL WT. 188.20
H.S. CODE  

TOXICITY

 
SYNONYMS o-Methylphenol sulfonic acid; o-Methylphenylol sulfonic acid;
o-Oxytoluene sulfonic acid; o-Toluol sulfonic acid;

DERIVATION

 

CLASSIFICATION

 

PHYSICAL AND CHEMICAL PROPERTIES

PHYSICAL STATE yellowish liquid
MELTING POINT  
BOILING POINT  
SPECIFIC GRAVITY

 

SOLUBILITY IN WATER  
pH

 

VAPOR DENSITY  
AUTOIGNITION

 

NFPA RATINGS  

REFRACTIVE INDEX

 

FLASH POINT

 

STABILITY Stable under ordinary conditions.

APPLICATIONS

Sulfonic acid is a compound with general formula RSO2OH, where R is an aliphatic or aromatic hydrocarbon. It is a derivative of sulfuric acid (HOSO2OH) where an OH has been replaced by a carbon group or a compound where a hydrogen atom has been replaced by treatment with sulfuric acid; for example, benzene is converted to benzenesulfonic acid (water-soluble). Sulfonic acid has a sulfur atom bonded to a carbon atom of a hydrocarbon and bonded also to three oxygen atoms, one of which has been attached to a hydrogen atom. Sulfonic acid is acidic due to the hydrogen atom, stronger than a carboxylic acid. Sulfonic acid is one of the most important organo sulfur compounds in organic synthesis. Sulfonic acids are used as catalysts in esterification, alkylation and condensation reactions. Sulfonates are salts or esters of sulfonic acid. Sulfonic salts are soluble in water. Sulfonic acid and its salts present in organic dyes provide useful function of water solubility and or improve the washfastness of dyes due to their capabiltity of binding more tightly to the fabric. They are widely used in the detergent industry. Alkylbenzene sulfonic acid is the largest-volume synthetic surfactant because of its relatively low cost, good performance, the fact that it can be dried to a stable powder and the biodegradable environmental friendliness. Sulfonate cleaners do not form an insoluble precipitates in hard water. Sulfonic acid salts and esters are intermediates widely used in organic synthesis and particularly phenolic compounds and cation exchange resins. They are synthetic intermediates for a number of biologically active compounds and pharmaceutical candidates such as sulfa drugs.

Cresols are methyl substituted phenols at relative to the hydroxyl group, ortho-, meta-, and para-cresol. There are three structural isomers. The names of the three compounds indicate which of the hydrogens on the benzene ring portion of the molecule have been replaced. They are obtained from coal tar or petroleum as by-products in the fractional distillation and in coal gasification. They are also formed as by-products during the combustion of wood. The various isomers can be manufactured by the methylation of phenol, toluene sulfonation and alkaline hydrolysis, or the hydrolysis of 2-isopropyltoluene or alkaline chlorotoluene. Because the boiling points of these three compounds are nearly the same, a separation of a mixture of the three into its pure components is impractical. They are highly flammable and soluble in water, ethanol, ether, acetone and alkali hydroxides. The mixture of cresols obtained from coal tar is called cresylic acid, an important technical product used as a disinfectant and in the manufacture of resins and tricresyl phosphate. Cresylic acid also refs to the mixture of phenols containing varying amounts of xylenols, cresols, and other high-boiling fractions, but not more than 5 percent phenol. Commercial cresols are prepared in a wide range of grades and purities to meet the user's requirements.  It is a liquid from clear to brown and is toxic to animals including human. It is corrosive and is a more powerful disinfectant and antiseptic than phenol. The primary use is for sterilizing as disinfectants and deodorizers, and pesticides. Its solution is used as household cleaners as a disinfectant. Creosote products are mixtures of many aromatic hydrocarbons including phenols and cresols. Creosote obtained from coal tar is poisonous and provides protection against fungi, shipworms, termites, and psoriasis. It is used chiefly as a wood preservative, e.g., in wooden poles, railroad ties, and timber. They are also used as animal and bird repellents. Animals may suffer skin irritation or ulceration from creosote treated wood. Coal tar creosote and its derivatives are the most widely used wood preservatives. Wood tar creosote is a mixture of chiefly guaiacol, creosols and other phenolic compounds obtained from wood tar (mainly beech) by distillation between 203 and 220 C. It is insoluble in water, soluble in methanol, acetone. It is used as an external antiseptic, expectorant, gastric sedative, deodorant, and as an antiseptic parasiticide veterinary use in the form of creosote carbonate. It is used in the synthesis of pharmaceuticals and vanillin. Each cresols are used as solvents or disinfectants and as useful as raw materials for various chemical products including;

  • Antiseptics, disinfectants
  • Fragrances, deodorizing, odor-enhancer
  • Resins (phenol-formaldehyde, phenolic, and epoxy) and their additives
  • Phosphate esters (plasticizers)
  • Herbicides and pharmaceuticals
  • Rubber and plastic antioxidants
  • Dyes and pigments
  • Household cleaners and automotive degreasers
  • Solvent and paints
  • Lubricating oils, gasoline additives
  • Adhesives
  • Fiber and wood preservatives
  • UV- absorbers and photographic chemicals
  • Ore flotation agents

Cresols undergo electrophilic substitution reactions such as chlorination, bromination, sulfonation and nitration at the vacant position. They also undergo condensation reactions with aldehydes, ketones or dienes. O-cresol is a starting material for the synthesis of herbicides such as 4,6-dinitro-o-cresol (DNOC) and 2-methyl-4-chlorophenoxyacetic acid (MCPA). Meta-cresol is used in the manufacture of explosives. Meta and para-cresol are used in phenol-formaldehyde resins and are converted to tricresyl phosphate used as a plasticizer and gasoline additive and antioxidants such as di-tert-butylcresols (BHT). Ortho- and para-cresols are used in the production of lubricating oils and motor fuels.

Cresol sulfonic acids are used in the manufacturing disinfectants and friction dusts.

  • o-Cresol sulfonic acid (CAS #: 52277-26-6)
  • m-Cresol sulfonic acid (CAS #: 50851-56-4)
  • p-Cresol sulfonic acid (CAS #: 74985-84-5)
SALES SPECIFICATION

APPEARANCE

yellowish liquid
CONTENT

65.0% min

TRANSPORTATION
PACKING 200kgs in drum
HAZARD CLASS  
UN NO.  
OTHER INFORMATION