ETHYLENEGLYCOL MONOETHYL ETHER

PRODUCT IDENTIFICATION

CAS NO. 110-80-5

ETHYLENEGLYCOL MONOETHYL ETHER

EINECS NO. 203-804-1
FORMULA C2H5OCH2CH2OH
MOL WT. 90.12
H.S. CODE 2909.42

TOXICITY

Oral rat LD50: 2125 mg/kg
SYNONYMS Cellosolve; 2-Ethoxyethanol; Ethyl Cellosolve;
2-EE;Athylenglykol-monoathylather (German); Beta-ETHOXYETHANOL; Eter monoetilico del etilenglicol (Spanish); Ether monoethylique de l'ethylene-glycol (French); Ethyl cellosolve; Ethylene glycol ethyl ether; Glycol ether EE; Oxitol;

SMILES

 

CLASSIFICATION

 

PHYSICAL AND CHEMICAL PROPERTIES

PHYSICAL STATE Clear liquid
MELTING POINT -70 C
BOILING POINT

135 C

SPECIFIC GRAVITY 0.93
SOLUBILITY IN WATER Freely soluble
pH

VAPOR DENSITY
AUTOIGNITION

NFPA RATINGS Health: 2 Flammability: 2 Reactivity: 0

REFRACTIVE INDEX

1.408
FLASH POINT

43 C

STABILITY

Stable at ordinary conditions

APPLICATIONS

Glycol ethers, with the combination of ether, alcohol and hydrocarbon chain in one molecule, provide versatile solvency characteristics with both polar and non-polar properties. The chemical structure of long hydrocarbon chain resist to solubility in water, while ether or alcohol groups introduce the promoted hydrophilic solubility performance. This surfactant-like structure provides the compatibility between water and a number of organic solvents, and the ability to couple unlike phases. Glycol ethers are characterized by their wide range of hydrophilic/hydrophobic balances. glycol ethers are used as diluents and levelling agents in the manufacture of paints and baking finishes. Glycol ether series are used in the manufacture of nitrocellulose and combination lacquers. They are used as an additive in brake fluid. They are formulated for dying textiles and leathers and for insecticides and herbicides. They provides performance in cleaners products with oil-water dispersions. They are used in printing industries as they have a slow evaporation rate. They are used as a fixative for perfumes, germicides, bactericides, insect repellents and antiseptic. They are used as an additive for jet fuel to prevent ice buildup. Glymes, dimethyl ethers, have two terminal methyl groups which offer stability and high solvency. They are useful as solubilizers and phase transfer catalysts. Glymes offer the property required as an inert reaction medium chemical reaction due to their low chemical reactivity. They are suitable particularly for organometallic and polymerization reactions. Glycol ethers which contain hydroxyl group are also useful chemical intermediate. The hydroxyl group will undergo reaction with aldehydes (or ketones) to produce hemiacetals (or acetals), with epoxides to produce polyether alcohols, with halogenating agents to produce alkoxy alkyl halides, with carboxylic acid compounds or inorganic acids to produce a number of esters.

SALES SPECIFICATION

APPEARANCE

clear liquid

SPECIFIC GRAVITY

0.929 - 0.931
DISTILLATION IBP

132 C

DISTILLATION DP

136 C

MOISTURE

0.1% max

ACIDITY

0.01% max

COLOR, APHA

10 max

TRANSPORTATION
PACKING 190kgs in drum
HAZARD CLASS 3 (Packing Group: III)
UN NO. 1171
OTHER INFORMATION
Hazard Symbols: T, Risk Phrases: 10-20/21/22-60-61, Safety Phrases: 53-45

GENERAL DESCRIPTION OF GLYCOL

Glycol: any of a class of organic chemicals characterized by having separate two hydroxyl (-OH) groups, contribute to high water solubility, hygroscopicity and reactivity with many organic compounds, on usually linear and aliphatic carbon chain. The general formula is CnH2n(OH)2 or (CH2)n(OH)2. The wider meaning names include diols, dihydric alcohols, and dihydroxy alcohols. Polyethylene glycols and polypropylene glycols are sometimes called polyglycols which are derived by polymerization of ethylene oxide and propylene oxide respectively. Polyethylene glycols are water-soluble at all molecular weights, but polypropylene glycols become increasingly less water-soluble at high molecular weights. Ethylene glycol, HOCH2CH2OH, is the simplest member of the glycol family. Mono-, di- and triethylene glycols are the first three members of a homologous series of dihydroxy alcohols. They are colourless, essentially odourless stable liquids with low viscosities and high boiling points. Ethylene glycol is a colourless, odourless, involatile and hygroscopic liquid with a sweet taste.  It is somewhat viscous liquid; miscible with water; boiling point 198 C, melting point 13 C; soluble in ethanol, acetone, acetic acid, glycerine, pyridine, aldehydes; slightly soluble in ether; insoluble in oil, fat, hydrocarbones. It is prepared commercially by oxidation of ethylene at high temperature in the presence of silver oxide catalyst, followed by hydration of ethylene oxide to yield mono-, with di-, tri-, and tetraethylene glycols as co-products.  The yields of ethylene glycol are depend on pH conditions. The acid-catalyzed condition in the presence of excess water provides the highest yield of monoethylene glycol. Because of its low freezing point, involatility and low corrosive activity, it is widely used in mixtures of automobile antifreeze and engine-cooling liquids. Ethylene glycol has become increasingly important in the plastics industry for the manufacture of polyester fibers and resins, including polyethylene terephthalate, which is used to make plastic bottles for soft drinks (PET bottles). MEG is the raw material in the production of polyester fiber, PET resins, alkyd, and unsaturated polyester. Diethylene glycol, CH2OHCH2OCH2CH2OH, is similar in properties to MEG, but with a higher boiling point, viscosity, and specific gravity. Diethylene glycol is used in the manufacture of unsaturated polyester resins, polyurethanes and plasticizers. It is a water-soluble liquid;  boiling point 245 C; soluble in many organic solvents. It is used as a humectant in the tobacco industry and in the treatment of corks, glue, paper and cellophane. Diethylene glycol (DEG) is derived as a co-product with ethylene glycol and triethylene glycol. The industry generally operates to maximize MEG production. Ethylene glycol is by far the largest volume of the glycol products in a variety of applications. Availability of DEG will depend on demand for derivatives of the primary product, ethylene glycol, rather than on DEG market requirements. Triethylene glycol, HO(C2H4O)3H, is a colourless, odourless, non-volatile, and hygroscopic liquid. It is characterised by two hydroxyl groups along with two ether linkages, which contribute to its high water solubility, hygroscopicity, solvent properties and reactivity with many organic compounds. DEG is used in the synthesis of morpholine and 1,4-dioxane. TEG is displacing diethylene glycol in many of these applications on account of its lower toxicity. TEG finds use as a vinyl plasticizer, as an intermediate in the manufacture of polyester resins and polyols, and as a solvent in many miscellaneous applications. Triethylene glycol (TEG) is derived as a coproduct in the manufacture of ethylene glycol from ethylene oxide, and from "on-purpose" TEG production using diethylene glycol. Some capacities are based on total capacity for ethylene glycols. The main uses for TEG depend upon its hygroscopic properties. Air conditioning systems use TEG as dehumidifiers and, when volatilized, as an air disinfectant for bacteria and virus control. Glycols, having high boiling point and affinity for water, are employed as liquid desiccant for the dehydration of natural gas. The dehydration means the removal of water vapor in refinery tower so that dry hydrocarbon gases can exit from the top of the tower. There are wide range of glycol ethers which have bifunctional nature of ether and alcohol. cellosolves are monoether derivatives of ethylene glycol. They are excellent solvents, having solvent properties of both ethers and alcohols. Glycol family products are versatile compounds used in the fields include;
  • Anti-freezing and anti-icing additive
  • Intermediate in polymer production and chemical reaction
  • Solvent or plasticizer for plastic, lacquer, paint and varnish
  • Hydraulic, brake, thermal exchange fluids and fuel additive
  • Humidifying and plasticizing
  • Dehydrating
  • Coupling printing inks
  • Textile conditioning
  • Solvent for dyes in textile and leather finishing
  • Agricultural formulation
  • General purpose cleaners
  • Explosives manufacture
  • Electrolytic component
  • Humectant
  • Water-based coating
  • Preservative, rust remover, and disinfectant